Welcome to the CoffeeCrew forum for registered users. - feel free to make yourself at home. This forum is dedicated to coffee and espresso based issues.
Forum spammers, link referrers, link placement, scam artists, confidence artists, crooks and obvious commercial shilling is discouraged. Violation of this one simple rule will result in you and your immediate geographical region being banned from the site so do not post ads or links to your site here unless approved by me! Violators of this one simple rule will find their firm, employer, and your pitiful self invoiced $1000 per violation of this simple rule. Enjoy!
The coffeecrew guestbook and forum has been alive for more than 10 years! Please consider it your one-stop resource for finding out about all things coffee, espresso, specialty coffee and all associated gear and equipment.
We welcome long posts - there is no word limit in fact. Keep in mind that you can only type for 15 to 20 minutes in the forum-post submit window (session timeout)- so consider composing your posts or responses in a text editor - then cut and paste! Thank you and enjoy the forums!
Toshiba My Cafe - Missing Mystery Piece - 2006/08/13 21:50Brought forward from an article comment today,Maw writes: Bought this Toshiba Mill & Drip from our local assistance league. Discovered it is missing a piece that sits atop the basket. Would like to know it this piece served any function, other than closing the 1/2" space between the basket top and the lid. Hope you can help me. Thanks for your kind service. MawDave is an Ottawa resident and Coffee Expert
| | Forum posting/replies are available to registered users.
dave
Admin Admin
Posts: 195
Karma: 42
Re:Toshiba My Cafe - Missing Mystery Piece - 2006/08/13 22:06Maw,
I have never had one of these in my hands. Can you give us a description, a picture of the missing piece (e.g., from the manual) to give us some basis for answering your question? It wasn't, by any chance, a water distribution device (such as a piece of plastic with many holes), or something to help contain the grinds from the built-in whirly-blade, or something to protect the grinding mechanism from backsplash? I'm just guessing, I have never seen a My Cafe myself.
A quick google reveals a few comments that this machine may actually brew hot enough, unlike most coffee makers (especially the fancy, expensive ones).
If anyone else reading has owned a My Cafe and has an answer to Maw's question, do post it here: it would be appreciated.
Other than that, good to see you back, Maw!
DaveDave is an Ottawa resident and Coffee Expert
| | Forum posting/replies are available to registered users.
Maw
User Coffee Lover
Posts: 2
Karma: 3
Re:Toshiba My Cafe - Missing Mystery Piece - 2006/08/14 20:35Wish I had a picture or a manual! When I brought the My Cafe home, we tried to grind and brew, not realizing the part was missing. Beans and grounds flew in all directions and also went into the water compartment. So apparently it's the lid for the beans/grounds basket that's missing. We really want this machine but it looks hopeless. The very few mentions I saw of it (somewhere online - maybe on your site) were very positive. Must have been a goodie back in the early 80's. Thanks for writing back. This is a fun site. I'll still hope someone has some info. Maw
| | Forum posting/replies are available to registered users.
dave
Admin Admin
Posts: 195
Karma: 42
Re:Toshiba My Cafe - 2006/08/14 21:06Thanks for the feedback, Maw.
I'm not sure where to look for parts for a discontinued Toshiba coffee maker (their own product sites don't own up to having made kitchen appliances). Colin?
Just for the sake of argument, it doesn't happen to look anything like the Mr. Coffee Grind & Brew, Model GBX12, does it? [Edit: really don't think so]
I don't suppose it looks like you might be able to fashion a replacement from something like a small/medium ice cream (sherbet) tub lid? This is a reach, but not having seen your coffee maker, I wonder if there is any chance of cutting a few holes in one of these to replace the piece that contains the grounds and keeps them separate from the water -- especially if it happened to be mostly just a ring.
DaveDave is an Ottawa resident and Coffee Expert
| | Forum posting/replies are available to registered users.
maw
Visitor
Re:Toshiba My Cafe - 2006/08/17 19:30Thank you, Dave! I bought 2 different little 4-cup pots and tried their lids. But, each had openings and grounds still flew out. They were also a little too high. The grounds basket is on the top left, the water tank, top right, A 2-inch arm swings over to drip water onto the (missing)lid. Beneath the water tank, sits the pot. Beneath the grounds basket is the motor apparently. The pot is a creamy white and brown - 70s-looking. The few references I've read online really liked this machine. I broke down and bought a Mellita Mill & Brew today. I'm reluctant to give up on the Toshiba though. Thanks for your interest. Gwen
| | Forum posting/replies are available to registered users.
Maw
User Coffee Lover
Posts: 2
Karma: 3
Re:Toshiba My Cafe - 2006/08/17 19:41p.s. I'm going to try the ice cream lid. I'll let you know. maw
| | Forum posting/replies are available to registered users.
joe
Visitor
Re:Toshiba My Cafe - 2006/08/21 21:24My My Cafe died a couple months ago having served me very well for very many years. So I can part it out now :^( I can send the lid thingy (and the manual and more?) if ya want. joe in seattle
| | Forum posting/replies are available to registered users.
Inez
Visitor
Re:Toshiba My Cafe - Missing Mystery Piece - 2006/08/22 18:02Just to let you know there is a replacement Toshiba My Cafe Mill replacement carafe on Ebay, item #xxxxxxxx EDITOR: sorry - we cannot repost EBAY stuff here
| | Forum posting/replies are available to registered users.
David
Visitor
Re:Toshiba My Cafe - 2006/09/04 12:27Hi-If you are going to sell off the parts of your Toshiba "My Cafe" I am interested. I would like to buy the plastic part that goes on the bottom of the brew basket. I read in the other messages that someone needs to top plastic piece. Please contact me at: David@famouscookies.com
Thank You !!--David
| | Forum posting/replies are available to registered users.
Teri in Seattle
Visitor
Mr. Coffee Mr. Coffee Grind & Brew, Model GBX12 - 2006/09/05 13:34I have the GBX12 and it seems to have a part missing that engages the grinder blade. It would be something that is part of the post on the actual machine, not a brew/grinder basket component.
| | Forum posting/replies are available to registered users.
This thread discusses the Content article:
Hello Colin,
First, I would like to congratulate you on your site. It is very informative and I like the layout.
Regarding your review of the Uno, ho...
I came across this filter and curious to know if anyone has tried this filter and what were the results? Here is the link with picture of the unit!http://www.zcafe.ca/site/Product.aspx?ID=231
Any f...
Do yourself a giant favor and buy a Bodum or French press - this, in my opinion, is the only way to get a superior single cup of joe -
Aeropress is good too if you have an extra few minutes - but i...
I am in the market for a new drip coffee maker and I am wondering is there really anything out there to meet my needs...
I like to make a single cup of coffee (16oz) that is decaf, my husband likes...
Peterr, I was in your shoes not long ago. Did heaps of research and almost everyone I spoke to and everything I read boiled down to grinder . Seriously. A great or even good grinder and an entry l...
This thread discusses the Content article:
Great review!
Question : did you recalibrate your Virtuoso to pair with the espresso machine? I have a Virtuoso and Ascaso Steel Uno PM Prof and wis...
Hi there jumpball.
I've had my Virtuoso several months and recommend the following settings (on a factory calibrated unit - you can recalibrate yourself if you need a wider range for espresso):
...
