Welcome to the CoffeeCrew forum for registered users. - feel free to make yourself at home. This forum is dedicated to coffee and espresso based issues.
Forum spammers, scam artists, confidence artists, crooks and obvious commercial shilling is discouraged. Violation of this one simple rule will result in you and your immediate geographical region being banned from the site so do not post ads here! Capiche?
The coffeecrew guestbook and forum has been alive for more than 10 years! Please consider it your one-stop resource for finding out about all things coffee, espresso, specialty coffee and all associated gear and equipment.
We welcome long posts - there is no word limit in fact. Keep in mind that you can only type for 15 to 20 minutes in the forum-post submit window (session timeout)- so consider composing your posts or responses in a text editor - then cut and paste! Thank you and enjoy the forums!
Gaggia MDF LockUp - 2007/08/07 14:01Hi, and thanks in advance for your help.
After joyfully using my vintage Gaggia MDF grinder for about six months, the other morning it locked up. When I pressed the power button, all I got was a hum. Emptied all the beans out and took it up to the coarsest setting and tried again...same. Shook it...same. Cursed...same.
Was thinking about trying to take it apart to see if I could locate the problem, but I'm not sure how. I've seen a reference posted for plug-covered screws inside the hopper, but I don't see those on mine. Any ideas or assistance are greatly appreciated. Thanks.
| | Forum posting/replies are available to registered users.
Walter Hofmeister
Visitor
Re:Gaggia MDF LockUp - 2007/08/10 19:04Hi GaggiaGuy' I also bought an MDF about six months ago and it is working flawlessly. I have removed the hopper to convert the MDF to a stepless grinder and to take it apart:
1. Remove the lid. When you look inside the hopper you will see two tube-like things and these have rubber plugs on the top of them.
2. Remove the plugs (you may need something fairly sharp to scoop these out as they are in there very tightly).
3. Once the plugs are removed you will see a Philips head screw in each one, remove this screw from each (2).
4. Once the screws are removed you can pull the hopper out.
5. You will then see that the two screws you removed thread into two nuts that are tapped. These are actually screws as well. If you remove these, you will be able to remove the ring with the grind settings on it and unsrew the top burr holder (machined brass part).
Please be careful when you reassemble the unit as if done incorrectly you run the risk of the burrs touching, this will result in much knashing of teeth on your part.
If you are close to EspressoTec, I would get them to do it for you. It sounds like something has got jamed in the burrs. Your unit is still under warranty so I would let whoever you bought it from do the job.
By the way, have you tried just unscrewing the hopper and setting it to the coursest grind available? This could just dislodge whatever might be stuck. If that doesn't do it, you may have something wrong in the gear box which you will not likely be able to fix anyway.
As usual, do this at your own risk, and YMMV.
Walter H.
| | Forum posting/replies are available to registered users.
Walter Hofmeister
Visitor
Re:Gaggia MDF LockUp - 2007/08/10 19:51Sorry, I should have read the original post more slowly. As your unit is vintage, the warranty suggestion is useless. I have seen an MDF that was 8 or 9 years old and it had the plugs inside the hopper as well. If yours does not have them and you cannot unscrew the hopper and it is not obvious how it comes apart, I think you may be looking at taking it to a repair depot.
Walter Hofmeister
| | Forum posting/replies are available to registered users.
Marylis
Visitor
Re:Gaggia MDF LockUp - 2007/08/14 11:21I have a really old Gaggia MDF as well, and yes there are no plugs...the hopper will just come out if you pull it straight up (its a very snug fit though so it won't be easy), then you should be able to peek into the burrs to see if there's anything stuck in there. make sure to unplug it first! =)
| | Forum posting/replies are available to registered users.
colin
Admin Admin
Posts: 712
Karma: 19
Re:Gaggia MDF LockUp - 2007/08/14 19:10Sorry I have not jumped in earlier - I dare say (with my knowledge of electric motors--fairly advanced) that one or the other of the motor brushes may be worn down after 7 to 8 years.
Any good electrical appliance repair person can tackle this fairly easily - it is a simple repair.
There is no actual "lock-up" happening. The brushes supply AC to the windings of the motor - they are in constant contact with the rotors on the motor. They wear out eventually. I have had several electric lawn mowers that have gone through this - and it is a quick fix.Colin is the Senior editor and creator of the CoffeeCrew.Com Website
| | Forum posting/replies are available to registered users.
Our winner: Derek Lucas! Take a bow brother.
Runner up by a length - Dave Crothall of The Black Stilt...
Two dudes whose energy, if harnessed, could power a small town for a year.
These are ver...
So many on-lookers people lurking and never making a comment... I guess I've been one of them.
Well I tought it was about time to make a comment... As I've stated to Colin, I felt the poll did a fe...
I think the poll has some value at least in the sense of which cafes have a strong report with their regulars as well as an awareness of the poll going on. Obviously, the cafes near the top of the po...
Hi, I have been lurking here for a little while, funnily enough, something like this is what finally gets me registered and responding.
I just feel that the whole encounter would have been somewhat...
The story is sold as funny. Dude walks into Coffee in Washington D.C. and orders an iced espresso knowing full well they do not do iced coffee. Words are exchange. A is published. BoingBoing.net pic...
I think I'm just going to order a metal spout to put on it (possibly a fancy single one). It's relatively cheap but the shipping charges are absolutely crazy....
obvious wrote:
I tried Discovery last week --very nicely decorated, but a bit too much 'tude from staff and beans I bought weren't great, not bad, just not great.
-Pete
Yea. They either...
I have to stop you there:
There is no top cafe and the poll did not establish that. It was a vote contest and it was also an opportunity for other cafes to exercise their who gives a rats ass atti...
Forum 
