Welcome to the CoffeeCrew forum for registered users. - feel free to make yourself at home. This forum is dedicated to coffee and espresso based issues.
Forum spammers, scam artists, confidence artists, crooks and obvious commercial shilling is discouraged. Violation of this one simple rule will result in you and your immediate geographical region being banned from the site so do not post ads here! Capiche?
The coffeecrew guestbook and forum has been alive for more than 10 years! Please consider it your one-stop resource for finding out about all things coffee, espresso, specialty coffee and all associated gear and equipment.
We welcome long posts - there is no word limit in fact. Keep in mind that you can only type for 15 to 20 minutes in the forum-post submit window (session timeout)- so consider composing your posts or responses in a text editor - then cut and paste! Thank you and enjoy the forums!
Gaggia MDF LockUp - 2007/08/07 14:01Hi, and thanks in advance for your help.
After joyfully using my vintage Gaggia MDF grinder for about six months, the other morning it locked up. When I pressed the power button, all I got was a hum. Emptied all the beans out and took it up to the coarsest setting and tried again...same. Shook it...same. Cursed...same.
Was thinking about trying to take it apart to see if I could locate the problem, but I'm not sure how. I've seen a reference posted for plug-covered screws inside the hopper, but I don't see those on mine. Any ideas or assistance are greatly appreciated. Thanks.
| | Forum posting/replies are available to registered users.
Walter Hofmeister
Visitor
Re:Gaggia MDF LockUp - 2007/08/10 19:04Hi GaggiaGuy' I also bought an MDF about six months ago and it is working flawlessly. I have removed the hopper to convert the MDF to a stepless grinder and to take it apart:
1. Remove the lid. When you look inside the hopper you will see two tube-like things and these have rubber plugs on the top of them.
2. Remove the plugs (you may need something fairly sharp to scoop these out as they are in there very tightly).
3. Once the plugs are removed you will see a Philips head screw in each one, remove this screw from each (2).
4. Once the screws are removed you can pull the hopper out.
5. You will then see that the two screws you removed thread into two nuts that are tapped. These are actually screws as well. If you remove these, you will be able to remove the ring with the grind settings on it and unsrew the top burr holder (machined brass part).
Please be careful when you reassemble the unit as if done incorrectly you run the risk of the burrs touching, this will result in much knashing of teeth on your part.
If you are close to EspressoTec, I would get them to do it for you. It sounds like something has got jamed in the burrs. Your unit is still under warranty so I would let whoever you bought it from do the job.
By the way, have you tried just unscrewing the hopper and setting it to the coursest grind available? This could just dislodge whatever might be stuck. If that doesn't do it, you may have something wrong in the gear box which you will not likely be able to fix anyway.
As usual, do this at your own risk, and YMMV.
Walter H.
| | Forum posting/replies are available to registered users.
Walter Hofmeister
Visitor
Re:Gaggia MDF LockUp - 2007/08/10 19:51Sorry, I should have read the original post more slowly. As your unit is vintage, the warranty suggestion is useless. I have seen an MDF that was 8 or 9 years old and it had the plugs inside the hopper as well. If yours does not have them and you cannot unscrew the hopper and it is not obvious how it comes apart, I think you may be looking at taking it to a repair depot.
Walter Hofmeister
| | Forum posting/replies are available to registered users.
Marylis
Visitor
Re:Gaggia MDF LockUp - 2007/08/14 11:21I have a really old Gaggia MDF as well, and yes there are no plugs...the hopper will just come out if you pull it straight up (its a very snug fit though so it won't be easy), then you should be able to peek into the burrs to see if there's anything stuck in there. make sure to unplug it first! =)
| | Forum posting/replies are available to registered users.
colin
Admin Admin
Posts: 745
Karma: 19
Re:Gaggia MDF LockUp - 2007/08/14 19:10Sorry I have not jumped in earlier - I dare say (with my knowledge of electric motors--fairly advanced) that one or the other of the motor brushes may be worn down after 7 to 8 years.
Any good electrical appliance repair person can tackle this fairly easily - it is a simple repair.
There is no actual "lock-up" happening. The brushes supply AC to the windings of the motor - they are in constant contact with the rotors on the motor. They wear out eventually. I have had several electric lawn mowers that have gone through this - and it is a quick fix.Colin is the Senior editor and creator of the CoffeeCrew.Com Website
| | Forum posting/replies are available to registered users.
Yes, Im actually listing it for my mother who is back in NJ. But she seemed to think it was pretty hard to find, couldnt find anything relative on eBay so we werent sure on price....
Thought you might like to know I found one of these packed up in our basement and we've listed it on eBay. If you have any question please contact me via eBay. Happy bidding!
http://cgi.ebay.com/ws...
Every origin arabica coffee has some degree of lemon, citric or bright notes - some more muted, some less. Some of the brightest tasting coffees are classic Kenyan Double-A's - not my favorite. Fruit ...
Does a slightly acidic/almost lemony nuance to a coffee tell a coffee tester anything about what type of bean the coffee is made from? Nothing objectionable, not to me anyway, in fact, I like it espe...
Tell me what you really want to do, and I will give you some suitable tips.
The current rule is: If you are not employed within one hour of trying... in Victoria B.C. Canada - you are lacking a pul...
I'm moving back to Victoria in 2 weeks and thought I'd do some online scouting for great coffee shops before I arrive (I found a couple when I visited this summer, so I knew that there were great ones...
I have been watching the cafe scene in Victoria since the mid-seventies... I know, since before some of my most loyal readers were born.
We are in an interesting time now - there are more jobs than...
Yes - the problem is...
It is a super-automatic machine.
The water for the coffee touches so much plastic and travels through so many tubes... the coffee is brewed in a plastic or composite brew m...
Dear All,
I have Saeco Royal Cappucino, testing it for several type of different coffees from around the world, but the funny is the coffee taste always the same. It has prebrewer function and I di...
Forum 
