We have 5 guests online





Lost Password?
No account yet? Register

Whole Latte Love!

EspressoTec.Com


Baratza Inc.

Baratza.com - Creators of the Virtuoso!

Transcend Coffee

Home arrow Forum
Welcome to the CoffeeCrew forum for registered users. - feel free to make yourself at home. This forum is dedicated to coffee and espresso based issues.

Forum spammers, link referrers, link placement, scam artists, confidence artists, crooks and obvious commercial shilling is discouraged. Violation of this one simple rule will result in you and your immediate geographical region being banned from the site so do not post ads or links to your site here unless approved by me! Violators of this one simple rule will find their firm, employer, and your pitiful self invoiced $1000 per violation of this simple rule. Enjoy!

The coffeecrew guestbook and forum has been alive for more than 10 years! Please consider it your one-stop resource for finding out about all things coffee, espresso, specialty coffee and all associated gear and equipment.

We welcome long posts - there is no word limit in fact. Keep in mind that you can only type for 15 to 20 minutes in the forum-post submit window (session timeout)- so consider composing your posts or responses in a text editor - then cut and paste! Thank you and enjoy the forums!

CoffeeCrew.com Discussion Forum and Guestbook  


Re:Atomic washers - PAGING FREDERICK - 2006/12/12 14:06 Ok, I tried all that you have mentioned above but the rod for controlling the frother is totally jammed. I can’t even put it back to its original position, as in rotate it clockwise. The knurled knob is loose and the rod with the red knob is stuck.

Somehow I managed to remove the assembly that screws into the neck removing the frother tube itself. I will try WD-40 to see if I can get any further movement. Is removing the assembly a big problem?

I believe I followed your instructions on removing the knurled part than the unscrewing the rod anti-clockwise and ooops, stuck. Stuck meaning I used brute force and yet it still doesn’t shift one bit. I believe I might have even twisted the rod a bit.

I’d be grateful if you could help me on this. Thank you very much.
  | | Forum posting/replies are available to registered users.

      Topics Author Date
    emo
how do I loosen a stuck shaft to replace washers?
Morgan 2006/08/14 11:03
    thread link
thread linkthread link Re:how do I loosen a stuck shaft to replace washer
colin 2006/08/14 11:50
    thread link
thread linkthread linkthread link Re:how do I loosen a stuck shaft to replace washer
Morgan 2006/08/14 17:13
    thread link
thread linkthread linkthread linkthread link Atomic washers - PAGING FREDERICK
dave 2006/08/14 20:19
    thread link
thread linkthread linkthread linkthread linkthread link Re:Atomic washers - PAGING FREDERICK
frederick 2006/08/15 10:19
    thread link
thread linkthread linkthread linkthread linkthread linkthread link Re:Atomic washers - PAGING FREDERICK
DonzasH 2006/12/12 14:06
How is the current economic crisis effecting your coffee habits?
 
Powered by Joomlaboard

EspressoTop50.com